High frequency switching power supply reduces electroplating cost, Ningbo Jiafei environmental protection Co., Ltd

Jiafei high frequency switching power supply system, including switch rectifier equipment, valve regulated lead-acid maintenance free battery, DC feeder cabinet and so on, is an important equipment to ensure the stability and continuity of communication equipment and power supply.

Product features:

1. This product is made of components and advanced full bridge inverter technology, which makes the performance of the whole machine stable and the quality more reliable.
2. The whole machine has the functions of over-voltage, over-current, over temperature, short circuit, short circuit, automatic protection alarm and soft start.
3. The enameled wire used in our products adopts high temperature and corrosion resistant Teflon wire, and the copper interface is tinned to improve conductivity and good corrosion resistance. Achieve 7x24x365 full power operation, stable and smooth. The designed service life is more than 20 years, and the goal of zero failure.
4. The output waveform of DC is high frequency square wave with ripple coefficient less than 1%, which can improve the plating number, reject passivation, enhance the glossiness of the coating surface and the core penetration of the dark angle of the plated parts. It can also reduce the loss of raw materials and meet the special requirements of electroplating industry.
5. High frequency switching power supply adopts air-cooled design, which is easy to install. And equipped with remote control device, easy to operate. The machine can be switched on and off with load to reduce the tedious procedures of regulation.
6. Small size, light weight, the whole machine uses a full range of anti-corrosion technology production, enhance the anti-corrosion ability of the product, prolong the service life.
7. High efficiency, energy saving, working efficiency of more than 95%, arbitrary voltage current ratio is always a linear match. Save the loss of voltage regulator and main transformer of traditional rectifier, save energy more than 35%, greatly reduce the cost of electroplating, it is the most rational choice for surface treatment industry.